- For nailing of asphalt and fiberglass shingles
- Uses standard wire collated coil of 120 nails
- Quick dial adjustment of 9 settings for precise control of nail depth
- Double head valve allows nailer to recycle quickly
- Shingle gauge can be easily adjusted with a single lever lock
- Built-in magnet ensures proper loading and alignment of initial nail
- Built-in air filter prevents dust or foreign matter from entering the tool
- Contoured handle and conforming rubber grip for operator comfort
Makita AN611 Siding Nailer
The Makita AN611 is a 5 lbs. nailer that has rubber grips that provides you with increased comfort and handling. The AN611 nailer uses 1-1/4 inch - 2-1/2 inch nails. The AN611 is great for framing, sheathing, decking, sub floors, exterior decks, furring, siding, and crate & box assembly.
- 6.2lbs, lightweight and compact for easy maneuverability
- Most narrow design in its class, for ease of use in tight spaces
- Adjustable air deflector, directs the air exhaust in any direction
- Sequential firing mechanism ensures precision nail placement
- Unique positive safety allows tool to use nails as guide without damaging collation
- Racket grip, for added comfort and temperature protection
- Available with a short magazine for tight angles (NR65AKS) Magazine capacity of 22, dimensions of 11-3/4”x 3-3/8” x 13-3/16”, 5.7lbs
Hitachi NR90AE 3-1/2" Round Head Framing Nailer
The Hitachi NR90AE Framing Nailers superior design and engineering make this a top-of-the-list choice for a framing nailer. The nailer has a 21-degree angled magazine and fires nails from 2 to 3-1/2 inches. Loading is much faster and easier on the NR90AE because Hitachi's repositioned the loading mechanism at the rear of the magazine. A maximum of 64 plastic-strip collated full round head nails will fit in the magazine. The balance of this tool is incredible and the ergonomics are fantastic. The NR90AE is used for floor and wall framing, truss build-up, window build-up, construction of sub flooring and roof decking, wall sheathing and mobile home, and modular house construction.
SCN56 Medium Coil Nailer
The SCN56 Medium Coil Nailer is a superior siding tool that drives full round head nails from 1-7/8" - 2-1/2" in length and from .092 - .099 nail shank diameter. The SCN56 is a lightweight, rugged and dependable multi coil Nailer. The SCN56 coil Nailer has a unique mode of operation. The SCN56 allows the operator to select either a dual action or restrictive mode of fastening by simply switching the trigger - No need to change parts!
PW Staple Roofer
A longtime favorite with the pros, the PW Roofer is ideal for asphalt and fiberglass shingle roofing applications. The PW Roofer drives staples from 1/2" to 1-1/4",(13 to 32mm). The roofer model comes equipped with a special wear plate, a hardened safety mechanism, and a handy shingle gauge to ensure consistent spacing from course-to-course. (specify #130003N) The PW Industrial also drives from 1/2" to 1-1/4" and is ideal for attaching insulation, lathing, belt lines, furniture/cabinet frame butt-jointing and carton-to-skid. (specify #130002N) This tool is replaced by the PW150.
|
SN325 Framing Nailer Improved reliability, power-packed ultralight framing nailer drivessmooth, screw, and ring-shank nails for a variety or applications. This stool has a completely redesigned power pack, human-engineered comfort grip handle, and improved reliability provide fast nailing action for a variety of uses in construction, furniture, material shandlinghandling, and other industries. The tough SN325+ Nailer drives 3-1/4"smooth-shank, 3" screw-shank, and 3" ring-shank nails. Its angled magazine permits easy operation in hard-to-nail places. The no-jam nail guide cuts downtime from jammed fasteners and improves tool reliability. Sold 1989-1999. This tool is replaced by the FramePro701XP. |
|
SFN40 Finishing Nailer The SENCO ® SFN40 Finnish Nailer sets the standard for pneumatic finish tools! This nailer enables the craftsman to produce high-quality work through such features as the adjustable depth-of-drive control, oil-free design,angled magazine, and no-mar pad. Built to exceed SENCO's proven standard of quality, it drives a wide range of true brad-head finish nails with virtually jam-free performance. The SFN40's lightweight,well-balanced construction, plus a comfort-grip handle, helps reduce fatigue and increase productivity. This tool is replaced by the FinishPro41XP. |
|
DS300-AC The powerful SENCO ® DS300-AC is designed for high-volume, high-speed screw applications. Professional remodelers, contractors and DIYers will appreciate the convenience of the 3300 RPM collated screw system, which increases productivity by eliminating the need for handling loose screws. TheDS300-AC has corded power to drive 1-1/4" — 3" screws into even the toughest work surfaces. With the built-in extension, you can adjust the tool to the proper height, saving your knees and back. |
|
DS300-S2 Capable of driving all SENCO ® DuraSpin screws from 1-5/8" — 3" in length, this tool is ideal for woodscrew applications. The SENCO DuraSpin™ DS300-S2 collated screw system comes conveniently assembled to a rugged 2,500 rpm SENCO screwdriver. The DS300-S2 comes complete with the DuraSpin collated screw feed system mounted on a screwdriver, a flooring extension, a rugged carrying case, and two spare bits. |
|
DS200-14v DuraSpin, the collated screw fastening system from SENCO ® is designed to maximize efficiency in a wide variety of screw-fastening applications. Engineered for comfort and convenience, the DS200-14vcordless screw gun drives 1" to 2" screws |
• Engine design allows the tool to work as fast as the end user with consistent nail penetration
into both soft and hard joints.
• Sequential operating mode allows for precision placement and the bump operating mode provides
the user with production speed.
• 6 position dial allows the user to move between applications without having to re-acquire exact
depth setting
• Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers
or tool wrenches.
• Contact Trip Lock-Off disables the trigger when not in use and is easy to engage/dis-engage
• Integrated LED lights for long life and durability
• Rear-load magazine offers loading styles which provide versatility to accommodate the end user's
preference
• Top cap is impact resistant and easy to remove for troubleshooting
• Reversible belt-hook provides increased portability and versatility on the job-site.
• Increased visibility and durability along with protection for work-surface from the contact-trip.
• Part of the XRP DEWALT Cordless system
• 34 degree angled magazine (up to 110 nails capacity) will accept DEWALT or any competitive brand 34 degree 15GA standard DA type nails.
- Lightweight (4.9 lb) tool with a magnesium housing provides enhanced maneuverability and aids in minimizing user fatigue
- Delivers the power to consistently drive nails in the toughest applications
- Produces a cycle rate that works as fast as you do
- Convenient side-load canister design allows for quick and easy nail loading
- Tool-free depth adjustment assists in locating the perfect depth setting for precise nail penetration
- Pneumatic-bias feed piston provides consistent nail feed as pressure fluctuates, minimizing skipping and jamming
- Carbide inserts in contact trip foot protect against premature wear
- Double O-ring feed piston design provides protection against excessive feed piston wear
- Integrated jam clearing nose door eliminates down-time from bent fasteners caught in the nose piece
- Nail height adjustment lever allows for quick and easy adjustments
- Replaceable anti-skid pads aid in preventing the tool from sliding off the roof
- Hinged feed piston cover allows for quick and easy cleaning of feed piston area
- Trigger lock-off allows trigger to be disabled when not in use